External 1BAY SATAIII TO USB3.1 Enclosure

Model:

HS-108U30

Category:

Single bay

Product Features:

1.Hard Drive Tray:To remove the hard drive tray, press inward on the middle sliding part with your index and thumb, then slide it outward. To insert, place the tray bottom flat on the product bracket and slide it into place.

2.Power Interface:Connect using the provided special power adapter to power the device.

3.Power Switch:This switch serves as the main power control for the product. ON indicates power on, and OFF indicates power off.

4.USB 3.1 Type-C Interface:USB 3.1 10G data transfer interface, connect to a computer using the included USB 3.1 cable. (When the computer's interface is USB 3.0/2.0, the transfer speed will be limited to USB interface speeds.)

Installing a Hard Drive:

Screwless Installation of 3.5-inch Hard Drive:

1. Gently press the middle sliding part of the drive tray with your fingers to easily remove the hard drive tray.

2. The tray is designed for a screw-free installation. Remove the two side plates from the tray. Place the hard drive correctly into the tray, ensuring that the bottom screw holes of the hard drive are aligned with the positioning pins on the tray.

3. Secure the two side plates back onto the tray. Make sure both sides are firmly and properly clipped onto the tray.

4. After the tray is installed, place it back into the product, connect the power cable and the USB cable to the computer. Turn on the power switch to start normal operation.

Installation of 2.5-inch Hard Drive:

1. Remove the left latch.

2. Align the hole positions on the back of the 2.5-inch hard drive with the holes on the tray, and secure it with the provided screws on the back.

Specifications:

Attachment list: